King Arthur Tools
King Arthur's Tools has been developing unique wood
carving tools and accessories for 23 years. Supergrit Abrasives now
distributes only their newest generation improved product line with
enhanced performance and safety.
Merlin 2 is a handheld, variable speed rotary tool with
a 2" Diameter 8 tooth chain saw and various interchangeable carbide and
abrasive accessories. It is 11 1/2" long, weighs 1.2 lbs, and it plugs
into a standard 110 Volt 60HZ grounded electric outlet. It pulls 1 amp
(100 watts). Merlin 2 is light weight but powerful allowing you to shape
and cut wood and other materials with minimum pressure.
Hold the grinder base in your right hand, and guide it with your left hand under the front gear head.
Hold the grinder base in your right hand, and guide it with your left hand under the front gear head.
Is Merlin 2 Safe? King Arthur Tools has never had a
chain break, disc crack, or tooth fly off their chainsaw products. There
is a prepositioned safety guard. Protective eyewear and gloves are
recommended. The chainsaw requires no oil and can be easily replaced.
- There are four categories to the King Arthur line:
- Merlin 2 handheld 2" rotary tool and accessories
- Guinevere bench motor with flex shaft and proprietary inflatable miniature rubber sanding & polishing spheres and drums
- Lancelot 4" diameter 14 or 22 tooth miniature carving chainsaws which attach to your two handed angle grinder
- Holey Galahad 4" diameter structured carbide carving discs which attach to your two handed angle grinder
Merlin 2
Hand held Rotary carving tool and Accessories.
| Name | Description | Order |
|---|
Guinevere
| Name | Description | Order |
|---|
Lancelot
Lancelot 4" Diameter Chain Saw Cutters
Lancelot chain saw cutters are used on 4 1/2" angle grinders for the
rapid removal of wood for power carving. The Lancelot is made of a
circle of chain saw with consecutive left and right teeth (14 or 22
teeth) The chain is mounted between two stainless steel discs (5/8" or
7/8" holes). Most 4 1/2" angle grinders rotating at 10,000 to 13,000 RPM
are compatible (but no Makita Brand grinders). You need to secure the
Lancelot to the grinder with the universal nut and wrench kit.
Lancelot # 47822 with 22 teeth and 7/8" hole. Not as aggressive as the 14 tooth and leaves a finer finish.
Lancelot #45822 with 22 teeth and 5/8" hole.
Lancelot #47814 with 14 teeth and 7/8" hole, used for coarser cutting and general shaping.
Lancelot #45814 with 14 teeth and 5/8" hole.
Holey Galahad Carbide Discs
These 4" diameter structured carbide discs with a 7/8" arbor hole fit most 41/2"
and 5" angle grinders with our recessed universal nut and are rated at
maximum 14000 RPM. The cut outs on these patented discs allow you to see
what you are doing, and where you are going, without stopping the tool
and examining your progress. They provide fast and smooth surface
removal and easy control. Nothing shapes wood better.