Drums and Sanding Sleeves
Expanding Rubber Spindle Sander Drums and Sleeves 1/2" to 3" Long
These self-expanding, balanced rubber drums can be used on a drill press
or hand held drill or rotary tool. Slide the abrasive sleeve over the
drum and turn the nut to tighten. Resin over resin, Aluminum Oxide
cloth backed bands have smooth spiral joints. Contact us if you require
sizes or grits not shown below. Small drums are mounted on 1/4" shanks. A 2" X 1" X 1/4 drum is 2" diameter X 1" long X 1/4" shank. See our special kits for extra value.
Sale items are listed in red.
Expanding Rubber Spindle Sander Drums and Sleeves 4 1/2", 6" , 9" Long
These abrasive sleeves are made from rigid, resin bond, Aluminum Oxide cloth with smooth spiral joints. They fit CLAYTON, CRAFTSMAN®, DELTA, AND RYOBI oscillating spindle sanders.4 1/2" & 6" Drums have 1/2" Arbors and 9" Drums have 3/4" Arbors. They are messure Diameter X Long X Arbor. New: 4 1/2" Drill Press Mandrel holds 4 1/2" Drums. It connects to your Drill Press with a 3/8" reduced shank. $12.50.
Sale items are listed in red.
Expanding Rubber Spindle Sander Drums and Sleeves KITS
DRUM SANDING KITS
Our Drum-kits will save you about 1/3rd the cost of individual components. These self-expanding, balanced rubber drums can be used on a drill press or hand held drill or rotary tool. Slide the abrasive sleeve over the drum and turn the nut to tighten. Resin over resin, Aluminum /Oxide cloth backed bands have smooth spiral joints.
ALL DRUMS ARE MOUNTED ON 1/4" SHANKS.
Grits 50X(CRS), 80X(MED), 120X(FIN).
Pneumatic Sleeves
Our flexible sleeves are made from resin bonded aluminum oxide on "J"
weight cloth backing. They will flex along with the air inflated rubber
drum to follow the contours of what you are sanding. Before ordering,
please verify the circumference (length) of the sleeve by cutting open
an old sleeve and measuring the length. Our drums are heavy duty,
premium USA quality.The St. Louis Pneumatic hand held motor runs on 90PSI air pressure and requires a 30 CFM compressor. The portable drum with ball bearing handle connects to the motor with a 3/8-24 thread.
Pump Sleeves for Grizzly/Shopfox Portable Sander 1 1/8" X 4"
Pump Sleeves for Grizzly/Shopfox Portable Sander4" Wide X 3 1/2" Circumference - Grits 60, 80, 100, 120, 150, 220 (Mix and Match Grits)
| Name | Description | Order |
|---|---|---|
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 60 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 80 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 100 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 120 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 150 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 180 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: 220 | |
| 1 1/8" X 4" PUMP SLEEVES FOR GRIZZLY/SHOPFOX | Grit: ASSORTED | |
| 1 1/8" X 4" GRIZZLY/SHOPFOX PORTABLE SANDER W/ HANDLE (D4594) |
Turn your Drill Press into a Lathe
| Name | Description | Order |
|---|
USA Pneumatic Contour Drum Assemblies
Our flexible sleeves are made from resin bonded aluminum oxide on "J"
weight cloth backing. They will flex along with the air inflated rubber
drum to follow the contours of what you are sanding. Before ordering,
please verify the circumference (length) of the sleeve by cutting open
an old sleeve and measuring the length. Our drums are heavy duty,
premium USA quality.The St. Louis Pneumatic hand held motor runs
on 90PSI air pressure and requires a 30 CFM compressor. The portable
drum with ball bearing handle connects to the motor with a 3/8-24
thread.
Repair Kits contain: 1 oz. Goop Contact Adhesive, 60 ft Vinyl Tape, 2 Stem Valves, 25 Screws, and Repair Instructions.
Sale items are listed in red.