Accessories & Back-Up Pads
3M Plastic Disc Pad Face Plates
Back-up Pads for Orbital Sanders H&L

Eventually, pads wear out. This is particularly true of the nylon hook surface on Hook & Loop pads.
In this case you can replace the hook surface with our economical conversion discs instead of buying a new pad.
There are many different types so if you don't see your pad listed please call us. The following are
some of our most popular replacement pads.
Sale items are listed in red.
Back-up Pads for Orbital Sanders PSA

Eventually, pads wear out. This is particularly true of the nylon hook surface on Hook & Loop pads.
In this case you can replace the hook surface with our economical conversion discs instead of buying a new pad.
There are many different types so if you don't see your pad listed please call us. The following are
some of our most popular replacement pads.
Sale items are listed in red.
Backing Plates for Resin Fiber Grinding Discs

Retainer nuts are sold seperately at $3.50 each since plates wear out, but not the nut.
Sale prices are listed in red.
Sale items are listed in red.
Conversion Discs

Hook & Loop sanding products have now become as popular as pressure sensitive adhesive products. They
are about 20% more expensive but compensate with ease of switching from one grit to another, and
the finer finish due to the slight cushioning effect of the Hook & Loop. Eventually the heat of
friction from sanding weakens the nylon hooks. Discs start detaching. Instead of buying an expensive new
pad, just glue on a new hook surface to your back-up pad.
Sale items are listed in red.
Ergonomic Abrasive Sponge Holder and 4 Foam Sponges

Made in England for Ali Industries, Ohio
3" X 5" X 1" - Great for removing paint and hand sanding flat & contour surfaces.
Name | Description | Order |
---|---|---|
ERGONOMIC ABRASIVE SPONGE HOLDER and 4 FOAM SPONGES |
Interface Pads (H&L) Hook & Loop

Our soft foam interface extension pads in solid or
with vacuum holes attach to the hook surface of your back-up pad and add about 3/8" to 3/4" of soft foam. This helps you to better follow the contours
of curved shapes. H&L versions allow you to use hook & loop discs.
Sale items are listed in red.
Interface Pads (PSA) Pressure Sensitive Adhesive Discs

Our soft foam interface pads in solid or
with vacuum holes attach to the hook surface of your back-up pad and add
about 3/8" to 3/4" of soft foam. This helps you to better follow the
contours
of curved shapes. PSA versions allow you to use either stick
back discs.
Sale items are listed in red.
Foam Rubber Hand Pads

Ergonomic yellow foam pads have recesses on top for three fingers. Your thumb and pinky grab the side. Use 5" or 6" discs in PSA or H&L. An ingenius comfortable pad for hand sanding.
- 2 3/4" X 5" yellow or Black foam pads are used with either PSA or H&L sheets available in many grits.
- 5" & 6" yellow foam pads are used for confortable sanding flat surfaces with either PSA or H&L discs.
- 5" or 6" flexible black foam sanding pads with an elastic band are used to sand contoured shaped with either PSA or H&L discs.
- TEAR DROP rigid black rubber black has a 13/4" round contour, a point, and a 1 1/4" diameter hole. Wrap a half sheet of sandpaper (5 1/2" X 9") around the block. Sand corners, concave shape, and dowels inside the hole.
Hand Sanding Pad Kits

Pad Protectors

Mirka Abranet Pad Protectors
- These 1/8" thick H&L interface pads fit between the mesh Abranet
discs and your H&L Back-up pad. They do not restrict the vacuuming,
but do protect the nylon hooks on your pad.
Sale items are listed in red.
POWER BITS
Name | Description | Order |
---|---|---|
3 1/2 DOUBLE END PHILLIPS & FLAT BITS SET OF 10 (WITH HOLDER) |
Small PSA/Hook & Loop Holders 1/2" to 3" Diameter

These small holders come in hard, medium and soft density. The soft holders have a thick layer of soft foam wich conforms to the contours of say the inside of a wooden bowl.
Sale items are listed in red.
Specialty Replacement Pads

Here are some difficult-to-find Replacement Pads. They are listed clockwise from upper left.
A: Dewalt D-26441 PSA ¼ sheet Palm Sander.
4½" X 4⅛" - 4 screw holes 8 vacuum holes
4½" X 4⅛" - 4 screw holes 8 vacuum holes
B: Fein 63806129026 H&L Triangle Detail Sander.
2⅞" high 3⅛" base Star center
C: Porter Cable 330# - PSA ¼ sheet Palm Sander.
4½" X 4⅛" - 4 screw holes(part# 13597)
D: PSA Hand Sanding Block 2½" X 5" uses 2½" wide mini PSA sanding rolls,
Kit includes holder and 3 rolls(Grit 60, 240, 400)
Replacement rolls available in: 80, 100, 120, 180, 220
E: 3" Diam H&L Yellow Foam Pad is used with
3" H&L Discs for hand sanding.
F: Red Devil Mini Triangle (2" high X 1½" base) and Rectangle (2" X 1½") PSA Mini hand sanding Kit
for sanding in tight spaces. Kit includes: 4 PSA (3⅝” X 7¼ ”) Sheets in 6 grits (60, 80, 100, 120, 150, 220). Cut your own shapes into 144 loadings.
G: 1¼" diameter PSA Foam Mini Hand Sanding Pad used for detail sanding
1⅜" Norton Rosette PSA Discs 10 micron(1500 Grit)
2⅞" high 3⅛" base Star center
C: Porter Cable 330# - PSA ¼ sheet Palm Sander.
4½" X 4⅛" - 4 screw holes(part# 13597)
D: PSA Hand Sanding Block 2½" X 5" uses 2½" wide mini PSA sanding rolls,
Kit includes holder and 3 rolls(Grit 60, 240, 400)
Replacement rolls available in: 80, 100, 120, 180, 220
E: 3" Diam H&L Yellow Foam Pad is used with
3" H&L Discs for hand sanding.
F: Red Devil Mini Triangle (2" high X 1½" base) and Rectangle (2" X 1½") PSA Mini hand sanding Kit
for sanding in tight spaces. Kit includes: 4 PSA (3⅝” X 7¼ ”) Sheets in 6 grits (60, 80, 100, 120, 150, 220). Cut your own shapes into 144 loadings.
G: 1¼" diameter PSA Foam Mini Hand Sanding Pad used for detail sanding
1⅜" Norton Rosette PSA Discs 10 micron(1500 Grit)
H: 5½” X 3½” H&L Extension Pad for Bosch B7000 Details Sander
Great for sanding between the louvers of shutters.
H&L Triangles for above: available in grits 40 to 600.
I: Bosch SDP001 3½" H&L Triangle Pad with 6 Vac holes
and ⅜" center attachment hole. Fits Bosch and Fein
Multimaster Model 636. Made in Germany.
J: Dremel MM14 3⅛" H&L Triangle Pad with single ⅞" Vac hole and ⅜" center
attachment hole. Fits Dremel Multi-max and Fein Multimaster
Great for sanding between the louvers of shutters.
H&L Triangles for above: available in grits 40 to 600.
I: Bosch SDP001 3½" H&L Triangle Pad with 6 Vac holes
and ⅜" center attachment hole. Fits Bosch and Fein
Multimaster Model 636. Made in Germany.
J: Dremel MM14 3⅛" H&L Triangle Pad with single ⅞" Vac hole and ⅜" center
attachment hole. Fits Dremel Multi-max and Fein Multimaster
Sale items are listed in red.