Filters
Your Shopping Cart Is Empty

Secure Checkout

Hardware

Adapters For Roloc Type Holders

Name Description Order
3/8"-24 or 5/8"-11 Threaded Female to 7/16"-20 Threaded male (Merit 62764)
$19.95
3/8"-24 threaded female to 7/16"-20 Threaded male
$8.50
3/8"-24 threaded female to 7/16"-20 threaded female (63001)
$12.00

Adapters For Trim Cut Discs

Sale items are listed in red.
Name Description Order
5/16" threaded male to 1/4" smooth shank for Trim Kut
$3.00
5/16" threaded male to 5/8"-11 threaded female for Trim Kut
$5.00

Couplers

Couplers These hard to find parts connect one size shank or arbor to another size.
They allow you to attach tools or parts with different attachments. Perfectly machined steel with Black Oxide finish.
Name Description Order
5/8"(smooth female) - 5/8" (smooth female) w/Set screws
$18.00
5/8"(smooth female) - 1/2" (smooth female) w/Set screws
$23.00
1/2" to 1/2" Reducer Bushings fit inside above
$2.75
1/2"(smooth female)- 1/2" (smooth female) w/Set screws
$9.50
1/4"(smooth female)- 1/4" (smooth female) w/Set screws
$7.00
1/2"(smooth female) - 1/4" (smooth female) w/Set screws 11055
$9.50
5/8-11(threaded female) to 1/4" (smooth female) w/Set screws
$14.95

Extension Shafts

Extension Shafts
If the shaft on your 1/4" shank is too short, our coupler and shaft extensions will add length.


8" Rotary Extension Shaft with 3" Cotton Buff & 2 Adapters
Insert one end in your drill, hold the stationary metal sheath with one hand while the inner shaft rotates your flap wheel or buff. If you are sanding or polishing bowls or other hard to reach areas, our extention kit is indispensible. The 1/4" shank fits in the collet of your drill. You can remove the 3" buff and attach a flap wheel or 3" H&L disc holder (sold seperately).


Sale items are listed in red.
Name Description Order
2" Long Extension 1/4-20" Threaded to 1/4" shaft
$2.50
4" Long Extension 1/4-20" Threaded to 1/4" shaft
$3.50
6" Long Extension 1/4-20" Threaded to 1/4" shaft
$4.50
8" Long Extension 1/4-20" Threaded to 1/4" shaft
$6.00
1/4" smoth female to 1/4" smoth female coupler W/set screws
$5.50
Rotating Buff Extension X 1/4 (8" OAL)
$10.95

Keyless Chuck

Keyless Chuck
You can regulate the size of the opening on these expandable chucks as you would twist the adjustable collet of your drill. The other end is a female 1/2" or 5/8" arbor (smooth with set screws or 1/2" threaded) which attaches to the rotating shank of your bench motor or Drill press. Threaded Chucks are right hand only.


Sale items are listed in red.
Name Description Order
1/2" Threaded Female Medium to 1/4" (Chuck Only)
$13.50
1/2" Threaded Female Large to 1/2" (Chuck Only)
$18.50
5/8" Smooth Female Medium to 1/4" Chuck
$15.50
1/2" Smooth Female Medium to 1/4" Chuck
$15.50
1/2" Smooth Female Large to 1/2" Chuck
$26.50
5/8" Smooth Female Large to 1/2" Chuck
$26.50

Motor Arbors

Motor Arbors
Attach a flapwheel or deburring wheel to the shank of your bench motor with these arbors. Available in sizes: 1/4", 3/8", 1/2" or 5/8" with left or right turn threading ...(If bench motor turns clockwise, you want Left Turn) The female end is available either smooth with set screws or threaded. The male end is a 1/2-20 threaded shank with flanges. 1/2" threaded and 5/8" threaded Motor Arbors are available in Right Turn ONLY (No Left Turn).

Sale items are listed in red.
Name Description Order
MOTOR ARBOR - 3/8" FEMALE SMOOTH MEDIUM / RIGHT TURN
$9.50
MOTOR ARBOR - 3/8" FEMALE SMOOTH MEDIUM / LEFT TURN
$9.50
MOTOR ARBOR - 1/2" FEMALE SMOOTH MEDIUM / LEFT TURN
$7.50
MOTOR ARBOR - 1/2" FEMALE SMOOTH MEDIUM / RIGHT TURN
$7.50
MOTOR ARBOR - 1/2" FEMALE SMOOTH EX LONG /LEFT TURN
$12.50
MOTOR ARBOR - 1/2" FEMALE SMOOTH EX LONG / RIGHT TURN
$12.50
MOTOR ARBOR - 1/2"-20 FEMALE THREADED MEDIUM / RIGHT TURN
$9.50
MOTOR ARBOR - 5/8" FEMALE SMOOTH MEDIUM / LEFT TURN
$7.50
MOTOR ARBOR - 5/8" FEMALE SMOOTH MEDIUM / RIGHT TURN
$7.50
MOTOR ARBOR - 5/8" FEMALE SMOOTH EX LONG / LEFT TURN
$13.50
MOTOR ARBOR - 5/8" FEMALE SMOOTH EX LONG / RIGHT TURN
$13.50
MOTOR ARBOR - 5/8" FEMALE THREADED MEDIUM / RIGHT TURN
$12.50
MOTOR ARBOR - 5/8"-11 FEMALE THREADED EX LONG / RIGHT TURN
$15.50
MOTOR ARBOR - 3/4" FEMALE SMOOTH MEDIUM / LEFT TURN
$9.50

Mandrels for Wheels, Flaps, Rolocs & CutOffs

Mandrels for Wheels, Flaps, Rolocs & CutOffs
Mandrels for Wheels, Flaps, Rolocs & CutOffs
***OAL = Over all Lengh.

Sale items are listed in red.
Name Description Order
(E-1) 6mm X 1/4 (2 OAL)
$2.50
(E-2) 1/8 X 1/4 (2 OAL) MANDREL
$4.00
(E-3) 1/4 X 1/4 (1 3/4 OAL) MANDREL
$3.75
(E-4) 1/32 X 3/32 (1 3/4 OAL) MANDREL
$2.50
(E-5) 1/4 X1/8 (2 1/4 OAL) MANDREL
$3.50
(E-6) 1/8 X1/8 (1 1/4 OAL) MANDREL
$2.50
(E-7) 1/4 ARBOR 1/4 SHANK 2 1/4" LENGTH
$6.50
(E-8) 3/8 X1/4 (1 3/4 OAL) WHEEL
$3.50
(E-9) 1/2 X1/4 (2 OAL) WHEEL
$5.50
(E-10) 1/4-20 THREAD X 1/8 SHANK (1 1/2" OVERALL LENGTH)
$3.75
(E-10-1/4) 1/4-20 THREAD X 1/4 SHANK (1 1/2" OVERALL LENGTH)
$1.50
(E-11) ROLOC X 1/8 (1 3/4 OAL)
$4.50
(E-12) ROLOC X 1/4 (1 3/4 OAL) MANDREL
$3.00
(E-13) 1/4-24 X 1/4 (1 1/2 OAL) MANDREL
$2.50
(E-14) 3" CUTOFF MANDREL - 1/4 or 3/8 INTERCHANGEABLE ARBORS X 1/4 SHANK
(E-15) 3/8 ARBOR 1/4 SHANK 2 1/4" LENGTH CUTOFF MANDREL
$6.50
(E-16) 1/16 X 1/8 (1 1/2 OAL) MANDREL
$2.75

Non-Slip Router Mat

Non-Slip Router Mat Best Non-Slip Router Mat - Made in USA

This beige, medium density open cell foam is 1 1/2 times thicker than most router mats. It has a non skid textured surface. It weighs just under 3 lbs. (see photo above)
Name Description Order
FOAM RUBBER NON-SLIP ROUTER MAT 2FT X 3FT X 3/16

Other Adapters

Name Description Order
5/8"-11 threaded male to 3/8"-24 threaded female
$7.50
5/8"-11 threaded female to 5/8"-11 threaded male 2" long extension
$5.75
5/8"-11 threaded male to 1/4" shank
$5.25
5/16-24 to 1/4" Shank Adapter
$3.75
5/16-24 to 3/8" Shank Adapter
$3.75

Reducer Bushings

Reducer Bushings
Reducer Bushings to fit the arbor hole of your wheel to the size of your motor shank.
Sale items are listed in red.
Name Description Order
REDUCER BUSHINGS 1" - 1/2" Grit: set
$3.00
REDUCER BUSHINGS 1" - 5/8" Grit: set
$3.00
REDUCER BUSHINGS 1" - 3/4" Grit: set
$3.00
REDUCER BUSHINGS 1 1/4" - 3/8" Grit: set
$4.00
REDUCER BUSHINGS 1 1/4" - 5/8" Grit: set
$4.00
REDUCER BUSHINGS 1 1/4" - 3/4" Grit: set
$4.00
REDUCER BUSHINGS 1 1/4" - 7/8" Grit: set
$4.00
REDUCER BUSHINGS 1 1/4" - 1" Grit: set
$4.00
REDUCER BUSHINGS 1 3/4" - 1" Grit: set
$6.25
REDUCER BUSHINGS 2" - 1/2" Grit: set
$6.50
REDUCER BUSHINGS 2" - 5/8" Grit: set
$6.50
REDUCER BUSHINGS 2" - 3/4" Grit: set
$6.50
REDUCER BUSHINGS 2" - 1" Grit: set
$6.50
REDUCER BUSHINGS 3" - 1" METAL Grit: set
$7.50
REDUCER BUSHINGS 3" - 1 1/4" METAL Grit: set
$7.50
REDUCER BUSHINGS 3" - 1/2" METAL Grit: set
$7.50
REDUCER BUSHINGS 3" - 5/8" METAL Grit: set
$7.50
PLASTIC TUBE NESTING BUSHINGS 1", 3/4", 5/8", 1/2" Grit: set
$3.00
PLASTIC TUBE NESTING BUSHINGS 1 1/4", 1", 3/4", 5/8", 1/2" Grit: set
$3.25

Rake

Name Description Order
WHEEL RAKE W/ 4 SETS OF METAL TEETH & WOODEN HANDLE
$19.95

Rotary Tool Kit & Accessories

Rotary Tool Kit & Accessories Enkay Variable Speed Rotary Tool and 40 Accessories + Flex Shaft with collet.
See our collection of individual accessories miniature cut-off wheels

Sale items are listed in red.
Name Description Order
ENKAY ROTARY TOOL W/ 40 ACCESSORIES
$39.50
134pc ACCESSORY KIT (For Rotary Tool) stone points, wheels, cutoffs etc.
$32.50
5 - 2" REINFORCED CUTOFF WHEELS + 1/8 MANDREL KIT
$5.50
10 - 1 1/2" REINFORCED CUT OFF W/1/8" MANDREL
$6.50
5pc STONE POINT SMALL - 1/8" SHANK
$4.00
5pc STONE POINT MEDIUM - 1/8" SHANK
$5.00
1 1/4" ROTARY SAW & MANDREL SET
$5.00
1 1/4" ROTARY SAW (SAW ONLY)
$3.00
8PC SMALL FELT POINTS - 1/8" SHANK ASSORTED SHAPES
$5.95
12PC SMALL FELT BURR SET - 1/8" SHANKS ASSORTED SHAPES
$8.50
SPECIAL! 100 - 1/2"X1/2" AO 80 GRIT BANDS with 2 - DRUMS 1/8" SHANK Grit: 80
$15.00
16PC HOBBY KNIFE SET
$6.95

Special Adapters

Special Adapters
YOU NEED THIS HANDY ADAPTER specially machined for Supergrit Abrasives in USA.
5/8" - 11 Threaded Female Adapter to 1/4" Smooth Female with set screw.
This adapter (2" long and 1" Hex crossection) allows you to connect any accessory with a 1/4" shank to a bench motor or angle grinder with a 5/8-11" male shank. Set screw tightens with a hex wrench. Black oxide treated steel made in the U.S.A.


1/2" - 20 Threaded Female Adapter to 3/8" Fine Thread Male Adapter.
This adapter (2 3/16" long and 3/4" Diameter) allows you to connect a 1/2 X 20 Threaded male to a 3/8" Threaded Female. Polished steel made in USA.


Name Description Order
5/8"-11 Threaded Female Adapter(right turn) to 1/4" smooth female with set screws
1/2"-20 Threaded Female Adapter to 3/8" Fine Thread Male

Tapers & Srews For Buffs, Wheels & Crosses

***OAL = Over all Lengh.

Sale items are listed in red.
Name Description Order
3/16 Unitized Screw X 1/4 (1 3/4" OAL)
1/4 Buff Screw X 1/8 (1 1/2" OAL)
$2.50
Tapered Mandrel for buff X 1/8 (6" OAL)
$6.50
5/8 Female Tapered (4 1/4" OAL) Right Turn
$7.00
1/2 Female Tapered (4 1/4" OAL) Left Turn
$7.00
1/8 Collets for Dremel X 3/16 (5/8" OAL)
$1.75
3/32 Collets for Dremel X 3/16 (5/8" OAL)
$1.75
8/32 Thread for Square X 1/4" shank (3" OAL)
$3.75
3/48 Thread for Cross X 1/4 (2 1/2" OAL)
$3.75
5/16" Female Tapered (4" OAL) Right Turn
$6.50
5/16" Female Tapered (4" OAL) Left Turn
$6.50
1/4" Female Tapered (4" OAL) Right Turn
$6.50
1/4" Female Tapered (4" OAL) Left Turn
$6.50

3M CAULKING & APPLICATOR GUNS

3M CAULKING & APPLICATOR GUNS 3M CAULKING & APPLICATOR GUNS
Name Description Order
3M Heavy Duty Caulking Gun (Part 08995)
$7.50
3M Big Shot Applicator Gun (Part 08198)
$22.50
3M Applicator Gun No 16 (Part 08994)
$25.00